Juice Lubes Tubeless Rim Tape (30mm X 10m)

Features:

• High strength dual-layered film
• Bespoke pressure sensitive adhesive
• Optimum amount of stretch
• Finishing strips for perfect airtight seal
• Leaves no mess when removed
• 10M roll allows 4 applications or 5 for 26″

  How to Apply:

  Step 1 – Get Set
  Start with a clean dry rim, our Ultimate Workshop Degreaser will remove any grease or old adhesive. Use an old rag or microfibre cloth to wipe it away.

  Be sure to select the right size rim tape for your chosen setup. 

  Step 2 – Tape It
  Start applying the tape 2 spoke holes back from the valve hole. Press the tape down firmly into the centre of the rim as you go and smooth it out towards the edges, removing any trapped air as you go. Take it steady.

  Run the tape around the entire rim whilst keeping tension and working air from beneath the tape as you go. Finish 2 spoke holes past the valve hole. Cut the tape at 45 degrees for a cleaner finish.

  Step 3 – Check and Seal
  Check for any trapped air under the tape, push any bubbles out towards a spoke hole. Cover the end of the fitted tape with one of the finishing strips provided. This will help prevent any peel back.

  Use a small spike to pierce a hole in the tape over the valve hole. Fit our fancy valves. Whack a trye on. Add some Juice Lubes Tyre Sealant and give ‘er some wind.